FORGOT YOUR DETAILS?

AIR! DOORWAY

HIGH PERFORMANCE

RFID Gateway Installation for AIR! Reader & AIR! Go

GENERAL DESCRIPTION

The DoorWay is an Intelligent Reading Unit composed by an Air! Go device with two Array antennas, with high circular polarization and with two radiation pattern: A12 (CSarSlave) and A22 (CSar).
Contains sensors in the on/off device with RFID detection, support the EPC global Class 1 Generation 2, allowing the reading of any standard label within this market. High performance Ethernet connectivity for easy integration with existing systems, optionally there is the wifi module for wireless communication.
It is designed for use in warehouses’ access/exit or loading docks, allowing installation in ceilings or walls, saving the different existing door openings.
WHAT

High performance

Ethernet connectivity for easy integration with existing systems, optionally there is the wifi module for wireless communication.

It is designed for use in warehouses’ access/exit or loading docks, allowing installation in ceilings or walls, saving the different exiting door openings.

BENEFITS


  • Easy packaging and sending
  • High flexibility in the installation
  • Telescopic system for several gate width
  • Light and resistant to make the panoramic installation easier
  • Reading distances higher than6m

APPLICATIONS


  • Loading docks
  • Entrance and exit doors
  • Warehouse accesses
  • Intermediate points of control
  • Sorting areas
  • Conveyor belts

TYPICAL APPLICATION

RFID
SPECIFICATIONS

  • ETSI band - 865–868 Mhz
  • FCC Band - 902–928 Mhz
  • Supported TAGs - EPCglobal Class 1G2 ISO 1800-6C, ISO 1800-6B Ucode 1.19
  • Transmission power - +33 dBm / +36dBm
  • RFID Regulations - RoHS, ETSI EN 301 489, ETSI EN 302 208 y IEC 60950

ENVIRONMENTAL SPECIFICATIONS

  • Operation temperature -20ºC to 50ºC
  • Relative humidity 5% to 95% non condensing
  • Material PUR, ABS, PC , aluminium
  • Dimensions Telescopically adjustable: L: 1.5 to 3m / W: 0.5m D: 0.4 m Cover doors: 1,5 to 3.8m
  • Weight 17 Kg
  • Protection IP 65

POWER SUPPLY SPECIFICATIONS

  • Input voltage 100–240 Vac
  • Operating current 20W Maximum
  • Input frequency 50–60Hz
  • Output voltage 24VDC
  • Output current 3A maximum
  • Optional Earth leakage circuit breaker with self reclosing 1h autonomy (SAI) Watchdog IP, reset Remote supply

AERIALS

  • The basic system is supplied with 1 internal antenna and two lateral antennas with the following characteristics:
  • ETSI band 865–868 Mhz
  • FCC band 902–928 Mhz
  • Input impedance 50 Ohm
  • Input connector Female SMA

ASSEMBLY

  • Fixation 4 subjection points, for the panoramic installation

COMMUNICATIONS

  • Local Ethernet (10/100 BaseT)
  • Visualization 1 status led (optional)
  • GPIO 2 movement sensors for the reading activation
  • Gaining 4.7 dBic
  • VSWE (ROE) <1.6
  • Axial Ratio <1.2dB
  • Beam width 60º / 90º
  • F/B ratio <-15dB (+-3dB)
  • Input impedance 50 Ohms
  • Polarization Circular (RHCP)
  • Connector SMA Female

ASSEMBLY

LATEST POSTS

VIEW ALL -
OUR PARTNERS // TEHNOLOGIES USED

GET A QUOTE

We'll do everything we can to make our next best project!

TOP